Reconditioned Electrical Equipment

https://www.jpelectricalcompany.com/

Using Bus Plugs and Ducts in Manufacturing

There are millions of different pieces of manufacturing equipment and electrical components on the market today that only make sense to those who use them in their line of work.  Most of which make little to no sense to those of us who don’t use them. For example, what use would you have for bus plugs and bus ducts, what are they and how do they improve manufacturing.

Bus duct and bus plugs are used to distribute power around manufacturing facilities and industrial buildings such as processing plants, metal fabricating plants, and throughout heavy manufacturing areas where the machines aren’t stationary or need to be moved around from time to time.

All manufacturing buildings are powered differently.  For example, power is distributed through hardwiring in the walls of residential buildings so as to connect to all of the electrical outlets in a room. Industrial buildings such as factories, on the other hand, feature larger open floor plans with various machinery dispersed all around the facility, none of which are near any wall or permanent structure. They require a source of power, and in this case, a giant industrial electrical plug, which is where bus plugs and ducts come in.

A bus plug is essentially a component of a busway (industrial extension cord) that is used for delivering power to the appropriate equipment and circuits. Think of a busway as the extension cord you have at home that you use to plug in several connectors, the same applies to the busway and bus plug system, they enable flexibility and can be disconnected and rearranged to allow whatever manufacturing equipment that needs to be powered on virtually any floor of an industrial building. There is no physical hard wiring to the building, a manufacturing business can bring in more equipment without having to wire or rewire the entire electrical system; they simply have to plug in a bus plug into a busway, and voila, they are up and running.

Like with many electrical systems, bus plugs also require circuit protection, which in this case, is through a circuit breaker or a fuse depending on the application. Using bus plugs and ducts is the most economical and efficient way to power large commercial facilities or manufacturing plants and feed all manufacturing equipment, particularly, in areas of the building where the power distribution keeps changing.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Advertisements

7 Things to Know About During Asset Recovery

Asset recovery is the specialized technique that allows companies to go into facilities and complete electrical tear downs and manufacturing plant clean outs.  Companies specializing in asset recovery take resources that are no longer being utilized and resell them after they are put through the reconditioning process. This technique allows materials that would be normally disposed of and allows them to be sold.  Electrical surplus recovery companies do complete manufacturing plant clean outs, taking materials that are going to otherwise be disposed of and turning them into usable assets.  Below, we are going to look at the definitions that one should know during asset recovery and purchasing electrical components that are new, used, recycled, or refurbished.

Recycling:

Harmful materials and disposal costs of material waste can be reduced with recycling.  In the recycling process materials are converted during plant clean outs, generating income as well as preserving resources.

Reuse:

Equipment and electrical components often can be reused in other manufacturing facilities after a plant is closed.  Re-using equipment allows older equipment to be replaced with internal resources before the need arises to make an external purchase.  If the equipment is not currently needed but could be used in the future can be put into storage for later use.  Reusing idle equipment helps companies reduce depreciation, taxes, and capital.

Reconditioning:

This process begins with electrical components and machinery that has previously been used.  Companies recondition components by taking them completely apart and rebuilding them.  This process is done often during plant clean outs as a way of generating capital.  Components are refurbished and sold to other users at a discounted price.  The process of reconditioning reduces waste and allows companies to offer like new components for resale.

Reclaiming:

This process involves solvents, chemicals, lube oils and more that have been used to be reclaimed and reused, most often in a manner in which they weren’t initially used.  This allows companies to cut down on waste while being environmentally friendly.

Reselling:

When used or reconditioned surplus inventory is sold.  This occurs when it is no longer viable or useful to the company and there is no reason to store it for reuse later on.

These processes keep companies from literally throwing money away in dumps.  Manufacturing plant clean outs allow materials to be reconditioned or sold as used through electrical surplus recovery shops.  Companies that go in and process industrial plant clean outs greatly help companies recover capital from their previous investments.  It is important to extract every bit of value out of your initial investment.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

Purchasing Refurbished Equipment Over New

Running a business of any kind can be an expensive endeavor, especially when it comes to companies offering any kind of manufacturing.  Manufacturing equipment has a number of pieces that are constantly in motion which leads to components needing to be replaced and maintained frequently.  One way to stay within a budget while purchasing and maintaining equipment is to look into refurbished products.   Purchasing and using refurbished equipment and replacement parts can save upwards of sixty percent when compared to new.  The best part, it is as equally as reliable especially with regular maintenance.

Pros of Purchasing Refurbished

Low Upfront Costs:

When purchasing reconditioned equipment and reconditioned parts business’s can save a great deal of money.  Usually the cost of equipment, in any business, is the most expensive aspect of a new business venture.  You can start-up a new endeavor at a fraction of the cost without putting all of your money into equipment and leaving yourself without a financial cushion.

Overall Value:

Purchasing equipment that has been reconditioned, especially when it comes from a reputable source with proven knowledge and experience.  When equipment is well maintained, no matter if it was brand new or purchased refurbished, it will function for years.

Wear and Tear:

The biggest benefit of purchasing refurbished equipment is that the known wear and tear on the equipment can be addressed when it is reconditioned.  If we know that an axel always fails after 4 hours of constant use, then the issue can be addressed during the refurbishment process.  Although the exterior of reconditioned equipment can show wear and tear the internal aspects will be even better than new.

There are a number of reasons that purchasing refurbished electrical components and equipment makes sense for your business.    Reconditioned components allow you to save money without sacrificing quality.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

 

Three Reasons Your Circuit Breakers Keep Tripping

Electrical issues tend to create a feeling of anxiety and frustration to the homeowner. In this age, reconditioned electrical components are a blessing that has helped much to improve the electrical sustainability in the home; but still, many people are not using it due to a lack of awareness. The homeowners don’t know what’s wrong, but rather suddenly, they lose access to the power.

To repair the circuit breaker, they are habitual of spending lots of money repeatedly but don’t invest in refurbished electrical components because they don’t know what’s going on at the back. Let’s have a look.

Firstly, you would have to understand what is a circuit breaker trip?

It comes because of a circuit fixed to your electrical switch surpassing its sheltered parameters. They can be recognized by a sudden loss of energy to machine or loss of power in your home that is restricted to a zone.  There is a lot of issues that can bring about circuit breaker trips and following are the some of the top 3 reasons for an electrical breaker stumbling in your home.

Overload

A circuit over-loading is effortlessly the most widely recognized explanation behind a breaker trip. This basically implies that you have quite recently got excessive stuff stacked on the breaker. Breakers have a proper safe limit of energy from which they supply to your appliances and home. In the event, if it would be exceeded, the breaker will trip. You will witness this frequently when you endeavor to introduce another appliance where your electrical framework cannot bolster it, or if you connect to a powerful machine like a space radiator in a zone that does not have the entrance to safe amperage.

For example: If anyone has a 20-amp electrical circuit with 25 amps of electrical current running through it and at some time if you are using iron, hair dryer, and washing machine, then eventually the circuit breaker will trip to save itself from preheating.

Short-Circuiting

This thing happens when a hot wire encounters another hot wire(s). You will generally observe darkening around the outlet or burning smell when this happens. Also, in case you are managing a short-out, don’t interface with your outlet by any means. Leave the breaker tripping, and call emergency help as soon as possible.

Ground Fault

A ground fault is genuinely like a short circuit, if not indistinguishable. The distinction is in the collaboration. A ground fault is a point at which a hot wire meets your establishing wire, and along these lines, the protected establishing of your outlet winds up void and dangerous. Handle this in a similar way you would do the precautions with the short circuit.

Now you would have an idea about the reasons why your circuit breakers keep tripping and what you should do when it does.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

What Should You Avoid When Buying Refurbished Electrical Components?

Opting to buy reconditioned or refurbished electrical components has many benefits some that only your wallet can thank you for. Provided the reconditioned electrical components performs as they should, buying a used item for a lot less saves you quite a chunk of change, especially when it’s not financially feasible to buy a new electrical component. There are, however, certain risks involved in buying refurbished electrical components, particularly when you don’t know what to look out for.

You may start by asking yourself why the owner of said refurbished electrical component is selling the item(s) to begin with. The price might be right on the scope of your budget, but you might end up inheriting a costly problem that you have to contend with until you can re-sell it or buy another one altogether. You also may need to keep in mind that it might be hard to find spare parts of a used electrical component, which may also cost you an arm and a leg to have them repaired. Consider the following things that you certainly must avoid when buying refurbished electrical components:

Reputable Source

You finally find the component you have been looking for, the price is right, and it’s just a click away. But wait, with so many counterfeit parts available out there, how do you know that it is the real thing? When buying refurbished electronic components always look for a trusted source and crosscheck certain things such as how long they have been in business, including feedback and reviews from past customers, which ideally should be mostly positive because, well, you can’t please everyone. Reconditioned or refurbished electrical components that can be traced back to the manufacturer are probably ideal to purchase.

 Cosmetic Imperfections

This should go without saying that a visual inspection of a reconditioned electrical component is of great importance. Even when being sold by a retail trader as “new old stock” or “used,” the electrical component should be in its original packaging where packaging is applicable even if the packaging shows a little shelf wear and tear or possibly opened. The electrical component should be cleaned, inspected and deemed fully operational within the manufacturer’s specifications even with noticeable cosmetic imperfections, such as paint wear or product scratches.

Refurbished electrical components will not always be in their original packaging. However, they are Okay to purchase provided they have been repaired by the manufacturer or manufacturer’s authorized service, they meet with all the manufacturer’s specifications and is in excellent condition

Missing Information

Do not buy a refurbished electrical component from an advert that doesn’t give you all the key product specifications, including how long it’s been used, its accessories, illegible labeling, the warranty if applicable, as well as the return policy, etc. Whoever you chose to buy from should also be able to answer all your questions to ensure that you can get your money back if the refurbished electrical component doesn’t work as it’s supposed to.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

 

Four Rules for Electrical Safety After A Flood

Ensuring electrical safety after a flood must take precedence over salvaging any remains or inspecting the home. The reason: water and electricity do not mix! It is understandable that you are very eager to check on your belongings, to try to get things back to normal as soon as possible. However, there is always a high risk of electrocution after flooding and of course, no material belongings are worth facing any risks and hazards associated with live electricity in your apartment. Here are few practical tips that will help you ensure electrical safety after a flood.

Stay Away from A Flood-Damaged Basement

A flooded basement may have live electrical wires that you are not aware of. While it is easy to think you can really avoid meeting such wires, even the water may not be safe. It would be best to contact an electrician to ensure the home’s electrical meter is removed from the socket to ensure the house is totally disconnected from the grid. This is an ideal way to shut off all power to the house as there can still be an electrocution even if you have lost power – telephone wires, the cable wire or other wires may have electricity due to shorting and contact from outside electricity.

If there is Power Outage, Do Not Assume It Would Remain Off

After flooding, there may be widespread power outage from the municipal electricity supply. However, it is not ideal to rely on the power outage from the general supply for safety after a flood as power may be restored at any time. Never rely on the municipality utility but take steps to shut off the power from your own apartment.

Do not operate the HVAC Equipment until it is inspected

Flooding may sometimes affect the ductwork and could even flow into parts of your air conditioning system or some areas that may appear dry. The HVAC system could be a big electrical risk if powered up without inspection. Ensure a qualified HVAC specialist checks the system before power is restored.

Dispose Electrical Equipment Affected by Flood

After water in your apartment has been pumped out and recovery efforts have begun, you would need to dispose any electrical equipment affected by the flood. Items such as armored cable, fuse boxes, building wire, switches, air conditioners, heaters, circuit panels and breakers and any items that cannot be salvaged must be disposed to avoid any potential risks and dangers while they are in use.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

 

Significant Savings Seen Using Refurbished Electrical Components

In order to be successful in business, we need to be a tad prudent with how money is spent or re-invested into the business and purchasing. Is purchasing a new piece of electrical equipment the best investment, or does capitalizing on an opportunity to purchase quality refurbished electrical components at a significant savings make a viable economic sense?

Pros and Cons

Buying refurbished electrical components has its pros and cons. The pros, it is a great way to save money and in most cases the brand name equipment are built to last. Cons, it can mean money down the drain only when you don’t buy the electrical component from a reputable source and you could end up with an item that is even more damaged or missing integral parts.

Surplus electrical components can come from a few locations:

  • Assets are recovered from manufacturing plants that are closing. The surplus electrical components are then refurbished and sold at a discount.
  • Assets can be recovered from machines that are being disposed of but still have working components. Resulting in one of two situations, the components are refurbished and resold or the entire machine is refurbished.

While one of the benefits of buying reconditioned electrical components is that the items are generally set at a significantly lower price and some equipment contractors will accept returns if an item is ‘defective,’ the down side to this is that you will not get a manufacturer’s warranty.

What Does Reconditioned Mean?

Reconditioned electrical are components that are being repurposed.  They can’t be passed or sold as brand-new products but are instead reconditioned. Whether they are damaged or not, reconditioned electrical components also known as ‘remanufactured’ electrical components are completely disassembled and restored if need be in order to ensure that they perform as expected.

Therefore, before bidding on refurbished electrical components online, there are a few things to keep in mind and if possible ask questions about the item on sale. If it’s a refurbished electrical component be sure to ask about the companies return policies.

Be Cautious Where You Get Refurb Parts From

For a refurbished electrical component, beware of as it may arrive in worse conditions than the actual online photos however you are guaranteed of its safety and reliability. With most resellers and reconditioning companies, you will not be stuck with a defective refurbished electrical component if it is in fact not the right component to fix your machines issue.  An ad may give you all the specifics about the item you are about to purchase and check the seller’s feedback and buyers’ recommendations.  It is important to buy from reputable companies.  This helps to ensure that the reconditioned components that you are purchasing are as good as brand-new OEM electrical parts.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

 

The Importance of Using Refurbished Electrical Components

Most of the industry experts these days are looking forward to being able to use refurbished electrical equipment and replacement components on their manufacturing lines. Although many people have misconceptions about using refurbished components such as transformers, bus ducts, panel switches, circuit breakers, and such however the truth is that reconditioned machines and components offer a variety of benefits for your workplace.

Importance of using refurbished electrical components can be highlighted from below points:

Reduced cost:

One of the biggest benefits of using refurbished electrical component at industrial processing is that they are cheaper as compared to other identical solutions. The components that come after refurbishing process usually have low selling price irrespective of the reason why manufacturer renewed it. It will help you to save somewhere between 25 to 50 percent on your component purchase.

They come out of rigorous inspection process:

Components that are available at lower price range does not mean to present lower quality. Instead, the refurbished components undergo the more careful testing process. It doesn’t matter what wrong happened to the product before refurbishing process, manufacturers always prefer to follow careful inspection to ensure the best performance. It means you will be able to buy many superior components at the lower price range.

Ease in availability:

Most of the components get obsolete from the market with time and if some specific product lines need them it becomes a challenging task to find the lot again. But the surplus components are the best choice to find components of such limited lots. On time availability of these difficult to find components will help you to avoid downtimes at your workplace. Most of the refurbished products are generally available with same day shipping service.

They come with a warranty:

Just because you are buying Surplus Electrical Components for your product assembly lines, it doesn’t mean that they will not last long. As per market reviews, the refurbished components usually have more life and they also come with a warranty. Most of the manufacturers offer around 12 months warranty on their refurbished component collections so you can find them a trustworthy solution for your industry. Most of these components are certified that they will work safely and same as original ones.

The biggest benefit of buying refurbished components is that you can get services for parts that are outdated, and their production is stopped by the original manufacturer. If you are planning to repair your old pieces of electrical equipment and need same components for replacement, the surplus collection is the best choice to keep working without facing any trouble.

To ensure safe purchase of refurbished components, you must check the policy of the company. It is important to look for a vendor that ensures quality refurbishing of components with safe cleaning process including proper analysis, testing and rigorous inspections. The price range of refurbished components also varies company to company, so it is good to check with various vendors and compare their prices to ensure the best buy services. Once you can find a right seller that guarantees safe operation of refurbished components, you can use them safely at your manufacturing lines.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at https://www.jpelectricalcompany.com/products.php.  To contact one of our product reconditioning specialists call 877.844.5514 today.

Safely Refurbishing Manufacturing Equipment after a Flood

Flooding can cause much devastation.  One of them being the ability to ruin the workability of electrical equipment. Manufacturing equipment is much like any other electrical equipment in the way it reacts to water flooding inside its circuits. If you are the owner of such machinery, and it has been hit by a flood or any other water spill, then you don’t need to worry because you have an option to refurbish these electrical components.

Reconditioned electrical components can save you from spending extra money on buying new equipment. Also, it can save your time because installation of new equipment and getting it working just like the previous one can be hard.

However, manufacturing equipment requires prudent considerations in order to safely refurbish them. Let us go through these considerations.

  • Assess the damage

The first thing before even considering repairing or refurbishing any electrical component is to check the extent of the water damage that it has received. In order to do that, you would need to gather all the information that you have about the equipment. That information can include all the pertinent drawings and documentation that had come with the instrument.

Once you have that information, you can either yourself do the inspection or have a specialized team to do it. Too often, an electrical component is well insulated by the manufacturers against any water intrusions. Thus, through valuable knowledge about the machinery and the assessment of the damage, one can get an idea if it needs to be repaired.

  • Never try plugging the equipment

Water has electrical properties. When it seeps inside an electrical component, it floods all the circuits therein. If the component is running when it experiences water seepage, then it can result in short circuits. Alternatively speaking, if equipment is turned on after it has received water seepage, then it can still cause short circuits. Either way, the machinery is damaged, and thus, whether equipment is on or off before the flood, you should never plug them into the electrical socket to see if they are working.

  • Leave the equipment for drying

As we said before, you should never plug in the manufacturing equipment in electricity socket. What you should do is let them get dried. Nobody should be allowed to get near to it unless some decision is reached on whether the equipment should be completely removed or its individual parts are taken out for refurbishing.

  • Hire refurbishing professionals

What we talked about in the above paragraphs are main considerations on the part of the owner and the operators of the manufacturing equipment. However, when it comes to repairing the equipment after flooding, proper refurbishing professionals should be hired.

These professionals know the working of equipment and also the makeup of its complex circuits. They can guide you better regarding whether the components should be completely renewed or repaired.

Refurbished electrical components can work just like they used to when they weren’t damaged. Some people have a fear in their hearts regarding these reconditioned electrical components. However, they should know that the repairers are there to bring a damage component to life without compromising its workability.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at https://www.jpelectricalcompany.com/assetmanagement.php.  To contact one of our product reconditioning specialists call 877.844.5514 today.

 

Purchasing Reconditioned Electrical Components over New Surplus

Whether you are having your electrical devices fixed or giving them a whole new state-of-the-art facelift, knowing where to look and what to look out for can make all the difference because buying refurbished equipment may be not only a cost-effective alternative in the short-term but also a secure long-term financial solution.

You may have a machine that has replacement parts that are becoming obsolete, but you don’t want to get rid of it or a need to preserve the equipment because it is that is no longer being produced. With a little research, there are certified refurbished experts, licensed distributors, or original equipment manufacturers available out there who are more than capable of offering you solutions that are specific to your needs.

Refurbished Does Not Mean Not As Good

Common misconceptions about purchasing refurbished electrical components are that people believe that because components are often sold at reduced prices, it means they are reduced in performance. This is in fact not the case at all. An electrical component that has undergone comprehensive re-manufacturing and testing process according to all OEM specifications can be restored to a perfect working condition enough that an untrained eye would believe it is brand new. This ensures that refurbished electrical components can continue to function without any hiccups and failure rates that are significantly reduced since it has been tested.

It’s not to mean that those with an inclination toward newer technology than what is currently available in the refurbished equipment market shouldn’t go for the surplus electrical components. In fact, buying new is ideal for those who do not have any financial constraints for this type of purchase.

On the other hand, reconditioning electrical components, otherwise known as refurbishing, electrical components, does indeed, save money, time, and it also extends the components lifespan. In addition to that, by giving electrical components an update, electronics manufacturers reduce e-waste and can keep electronic waste out of landfills. Electronic waste has become a growing concern over the recent past following the exponential growth of the global market of electrical and electronic equipment.

Testing Procedures

It is also important to mention that while original equipment manufacturers OEM are only obligated to batch test their products, reconditioning or refurbishing standards require 100% device testing, a process that follows the following stringent procedures:

  • Conduct an initial test
  • Strip, inspect, and clean the electrical device
  • Replace and recondition worn or damaged electrical components
  • Reassemble
  • Perform verification test
  • Document and finally certify

Saving Money When Possible

If you intend on buying new, more expensive equipment but cannot afford it, purchasing a refurbished electrical component or a piece of newly refurbished equipment may be your best bet.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at https://www.jpelectricalcompany.com/products.php.  To contact one of our product reconditioning specialists call 877.844.5514 today.