Bus Plugs 101

Bus plugs are electrical instruments used to allocate power throughout large electrical areas. Flat copper conductor plates are enclosed in a metal casing, which creates a compact design. Bus plugs are typically beneficial in areas where cables cannot be wired in large industrial factories. The plugs are connected to busways or bus bars to provide electrical power when needed.

Since bus plugs have a wide variety of uses and advantages, they are considered more effective than electrical cables. Given that they have no physical electrical wires within the building, the entire system can easily be disconnected and rearranged to fit almost any floor plan.

Bus plugs are used for a variety of reasons, most notably:

• Streamlined Current Distribution: Cabling is usually chaotic throughout most industrial plants. With various manufacturing aspects requiring electricity, distributing power can be a challenge. However, with bus plugs, electricity can be installed almost anywhere…and they are easy to move.
• Safety and Security: Bus plugs are guaranteed to be safer than cable systems due to their metallic casing, which reduces wire damage and electrocution.
• Easy Installation: Typically low in complexity, bus plugs do not require holes, cable cutouts, or any other special equipment. Ceilings or walls do not require support for heavy cables, and the installation time is relatively quick.
• Energy Savings: Bus plugs are compact, which means the copper conductors are placed next to each other. Energy is conserved due to the reduction in induction resistance.
• Flexibility and Maneuverability: More flexible than a typical cable system, bus plugs are light, easy to carry, and do not need ceiling or wall support. They can also be transferred to a new location effortlessly.
• Compact, Concealed Design: Bus plugs appear much more organized than a traditional cable system since everything is concealed inside the casing. There are no more twisted, dusty, entangled bundles of cables running throughout your building.

Electrical components should only be purchased from a reputable company. At J&P Electrical, bus plugs are our business. Contact us today to learn more about our products and pricing.

____________________________________

J&P Electrical is a full-service electrical supply company. At J&P, we source contractors, end-users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We also purchase a wide range of heavy industrial electrical equipment such as bus plugs, bus duct, transformers, circuit breakers, fuses, and switchboards. Call us at 877-844-5514 or visit us at https://www.jpelectricalcompany.com.Written by the digital marketing staff at Creative Programs & Systems: www.cpsmi.com

The Importance of Preventative Maintenance of Bus Ducts

Having an uninterrupted supply of electricity for customers is the main goal of a power generation industry to allow them to meet their demands. It can be very costly for a company to have any unplanned downtime due to any equipment failures. This is a fact when looking at bus duct systems since they effectively transfer power to switchgear and other loads. To prevent avoidable downtimes from occurring it is imperative to have preventative bus duct maintenance in place.

 

Neglect on Systems

 

Too often, critical systems like bus ducts that transmit power at industrial buildings go neglected. The reason behind this is because people are under the wrong concept that since bus duct systems do not consist of moving internal parts that they do not need regular maintenance or service. Over time, carbon and other foreign debris can build up and contaminate the bus systems that will, in turn, cause cataclysmic arcs and damage the equipment. Without proper inspection and preventative maintenance performed regularly, the equipment will have without a doubt have unexpected failures that will cause outages, can further damage equipment and increase safety risks for personnel as well. 

 

Preventing Failures

 

It is very important to have regular and systematic inspections of the bus duct systems performed. If the installation is done in unfavorable conditions, for example, high temperature/ humidity or environments with a lot of dust it is recommended these inspections are performed at a more frequent interval in these instances. The most common failures that are observed during bus duct failures can range from damaged gaskets/ bellows, grounding issues, cracked weld joints, conductor connection integrity, and even improper termination design or installation.

 

Installing New Bus Ducts

 

One factor to consider when installing a new or replacing bus duct system is to consider the ampacity requirement for your actual operating environment as opposed to just choosing one based on a standard chart’s temperature assumption. The most bus generally occupies at high-temperature areas since they are installed near the ceiling. Temperatures will continue to fluctuate while under load or no load as well, so it is important to do the research and know the limits of the equipment. Another good piece of advice is to install extra protection with service conductor bus ducts to protect the bus duct zone from fault. It may be an extra up-front cost but the savings from downtime in the future will be well worth it.

 

J & P Electrical Company is a full-service electricalcompany that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We offer a wide range of electrical equipment such as bus plugs, bus ducts, panelswitches, and transformers. Services include asset management, product reconditioning, and electrical products. More information can be found at https://www.jpelectricalcompany.com

Understanding Bus Plugs

If you are not an electrician or familiar with the terms used in the electric power fields, the products that make our homes and business run efficiently may be very mysterious. For some people, a bug plug sounds like its something the belongs in the automotive industry for actual busses? We are here today to get your electrical knowledge straightened out and give a inside look to what a bus plug really is and what it does.

What Is It exactly?

Bus plugs are basically what the name entails and are large industrial electric plugs that are like the ones you find in homes. However, Industrial or manufacturing plants that utilize heavy machinery require specialized power needs that is unique when compared to typical power distribution systems that are used inside residential or commercial buildings. Each bus plug is designed to connect to a specific section of bus duct or also known as busway, overhead and will then transfer electricity down to any chosen product whether it’s a lighting system or heavy equipment that needs power below. Busways were first produced in the late 1920’s for the automotive industry in Detroit and have since continued to improve and make their ways into many industrial plants to be utilized.

Why use them?

When looking at many industrial plants or buildings, many are structured in design with large open floor plans to maximize the total square footage and allow a variety of uses for the specific area. One of the major benefits of the busway and bus plug system is the flexibility of each product. With this type of installation, there is no physical hard wiring and the whole electrical system can be removed and rearranged to accommodate the building floor plan needed. As the future continues to change the machinery used, there are no concerns as to how power will be given to new equipment when things need to be moved or upgraded. Bus duct systems are a very efficient solution to get a lot of power to a big area that power distribution continues to change frequently. This is another reason why manufacturing plants need these products in order to provide large quantity of power to different areas of the building.

Proper Maintenance

Unplanned downtime can be detrimental and costly to any business and can be avoided with proper maintenance and service on products when needed. Bus ducts are extremely important in effectively providing power to switchgear and other different loads. Unfortunately, it is typical to find that critical systems that transmit power for industrial facilities are often neglected since many of people are unaware that regular maintenance and service is required even though bus ducts do not utilize moving internal parts.

 

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We offer a wide range of electrical equipment such as bus plugs, bus ducts, panelswitches, and transformers. Services include asset management, product reconditioning, and electrical products. More information can be found at https://www.jpelectricalcompany.com